MTAI Events Calendar

«
»
Sun
Mon
Tue
Wed
Thu
Fri
Sat
1
  • Certificate II in Automotive Vocational Preparation – AUR20716
    All day
    March 1, 2020-March 6, 2020

    Freeway Office Park, Building 8 2728 Logan Road, Eight Mile Plains

    Freeway Office Park, Building 8 2728 Logan Road, Eight Mile Plains

    AUR20716 Certificate II in Automotive Vocational Preparation is a course designed to give students a basic introduction to the automotive industry. Students undertaking this course will learn a range of tasks relating to identifying and inspecting mechanical and electrical components and systems of light vehicles.

    This is an ideal opportunity for candidates to increase their employability potential and this entry level course provides a pathway to an automotive apprenticeship.

    Accredited Units

    To successfully complete this course, you must be assessed as competent in the following units:

    AURAEA002 – Follow environmental and sustainability best practice in an automotive workplace
    AURAFA003 – Communicate effectively in an automotive workplace
    AURAFA004 – Resolve routine problems in an automotive workplace
    AURASA002 – Follow safe working practices in an automotive workplace
    AURETK001 – Identify, select and use low voltage electrical test equipment
    AURETR003 – Identify automotive electrical systems and components
    AURETR015 – Insect, test and service batteries
    AURLTA001 – Identify automotive mechanical systems and components
    AURTTK002 – Use and maintain tools and equipment in an automotive workplace
    AURTTA002 – Assist with automotive workplace activities
    AURTTA009 – Carry out mechanical pre-repair operations
    AURTTE003 – Remove and tag engine system components

    Venue

    The MTA Institute campus, Freeway Office Park, Building 8, 2728 Logan Road, Eight Mile Plains. Work placement may also be incorporated at a suitable worksite.

    Course Length

    Five weeks of face to face college-based training and assessment, including work placement where possible. Additional activities may need to be completed outside of this timeframe.

    Delivery

    MTA Institute uses a range of training and assessment methods. These include written and verbal questions/answers; and demonstration and observation of practical tasks.

    Entry requirements

    To be eligible for the Certificate 3 Guarantee program a participant must:

    • not hold or be undertaking a Certificate level III or higher qualification*
    • be an Australian or New Zealand citizen, permanent resident (including humanitarian entrants), or a temporary resident with the    necessary visa and work permits on the pathway to permanent residency.
    • permanently reside in Queensland and can provide residential confirmation of this.
    • have finished secondary school or no longer be at school
    • be aged 15 years or above.

    *Prospective students are only eligible for one subsidised training place*
    *If you completed a Certificate III qualification while in secondary school, you may still be eligible to receive a government subsidy for a Certificate III course with MTA Institute*
    Please also visit the Department of Employment, Small Business and Training website for more specific information on Certificate 3 Guarantee https://training.qld.gov.au/training/incentives/certificate3

    Click here to register

2
  • Certificate II in Automotive Vocational Preparation – AUR20716
    All day
    March 2, 2020-March 6, 2020

    Freeway Office Park, Building 8 2728 Logan Road, Eight Mile Plains

    Freeway Office Park, Building 8 2728 Logan Road, Eight Mile Plains

    AUR20716 Certificate II in Automotive Vocational Preparation is a course designed to give students a basic introduction to the automotive industry. Students undertaking this course will learn a range of tasks relating to identifying and inspecting mechanical and electrical components and systems of light vehicles.

    This is an ideal opportunity for candidates to increase their employability potential and this entry level course provides a pathway to an automotive apprenticeship.

    Accredited Units

    To successfully complete this course, you must be assessed as competent in the following units:

    AURAEA002 – Follow environmental and sustainability best practice in an automotive workplace
    AURAFA003 – Communicate effectively in an automotive workplace
    AURAFA004 – Resolve routine problems in an automotive workplace
    AURASA002 – Follow safe working practices in an automotive workplace
    AURETK001 – Identify, select and use low voltage electrical test equipment
    AURETR003 – Identify automotive electrical systems and components
    AURETR015 – Insect, test and service batteries
    AURLTA001 – Identify automotive mechanical systems and components
    AURTTK002 – Use and maintain tools and equipment in an automotive workplace
    AURTTA002 – Assist with automotive workplace activities
    AURTTA009 – Carry out mechanical pre-repair operations
    AURTTE003 – Remove and tag engine system components

    Venue

    The MTA Institute campus, Freeway Office Park, Building 8, 2728 Logan Road, Eight Mile Plains. Work placement may also be incorporated at a suitable worksite.

    Course Length

    Five weeks of face to face college-based training and assessment, including work placement where possible. Additional activities may need to be completed outside of this timeframe.

    Delivery

    MTA Institute uses a range of training and assessment methods. These include written and verbal questions/answers; and demonstration and observation of practical tasks.

    Entry requirements

    To be eligible for the Certificate 3 Guarantee program a participant must:

    • not hold or be undertaking a Certificate level III or higher qualification*
    • be an Australian or New Zealand citizen, permanent resident (including humanitarian entrants), or a temporary resident with the    necessary visa and work permits on the pathway to permanent residency.
    • permanently reside in Queensland and can provide residential confirmation of this.
    • have finished secondary school or no longer be at school
    • be aged 15 years or above.

    *Prospective students are only eligible for one subsidised training place*
    *If you completed a Certificate III qualification while in secondary school, you may still be eligible to receive a government subsidy for a Certificate III course with MTA Institute*
    Please also visit the Department of Employment, Small Business and Training website for more specific information on Certificate 3 Guarantee https://training.qld.gov.au/training/incentives/certificate3

    Click here to register

3
  • Certificate II in Automotive Vocational Preparation – AUR20716
    All day
    March 3, 2020-March 6, 2020

    Freeway Office Park, Building 8 2728 Logan Road, Eight Mile Plains

    Freeway Office Park, Building 8 2728 Logan Road, Eight Mile Plains

    AUR20716 Certificate II in Automotive Vocational Preparation is a course designed to give students a basic introduction to the automotive industry. Students undertaking this course will learn a range of tasks relating to identifying and inspecting mechanical and electrical components and systems of light vehicles.

    This is an ideal opportunity for candidates to increase their employability potential and this entry level course provides a pathway to an automotive apprenticeship.

    Accredited Units

    To successfully complete this course, you must be assessed as competent in the following units:

    AURAEA002 – Follow environmental and sustainability best practice in an automotive workplace
    AURAFA003 – Communicate effectively in an automotive workplace
    AURAFA004 – Resolve routine problems in an automotive workplace
    AURASA002 – Follow safe working practices in an automotive workplace
    AURETK001 – Identify, select and use low voltage electrical test equipment
    AURETR003 – Identify automotive electrical systems and components
    AURETR015 – Insect, test and service batteries
    AURLTA001 – Identify automotive mechanical systems and components
    AURTTK002 – Use and maintain tools and equipment in an automotive workplace
    AURTTA002 – Assist with automotive workplace activities
    AURTTA009 – Carry out mechanical pre-repair operations
    AURTTE003 – Remove and tag engine system components

    Venue

    The MTA Institute campus, Freeway Office Park, Building 8, 2728 Logan Road, Eight Mile Plains. Work placement may also be incorporated at a suitable worksite.

    Course Length

    Five weeks of face to face college-based training and assessment, including work placement where possible. Additional activities may need to be completed outside of this timeframe.

    Delivery

    MTA Institute uses a range of training and assessment methods. These include written and verbal questions/answers; and demonstration and observation of practical tasks.

    Entry requirements

    To be eligible for the Certificate 3 Guarantee program a participant must:

    • not hold or be undertaking a Certificate level III or higher qualification*
    • be an Australian or New Zealand citizen, permanent resident (including humanitarian entrants), or a temporary resident with the    necessary visa and work permits on the pathway to permanent residency.
    • permanently reside in Queensland and can provide residential confirmation of this.
    • have finished secondary school or no longer be at school
    • be aged 15 years or above.

    *Prospective students are only eligible for one subsidised training place*
    *If you completed a Certificate III qualification while in secondary school, you may still be eligible to receive a government subsidy for a Certificate III course with MTA Institute*
    Please also visit the Department of Employment, Small Business and Training website for more specific information on Certificate 3 Guarantee https://training.qld.gov.au/training/incentives/certificate3

    Click here to register

4
  • Certificate II in Automotive Vocational Preparation – AUR20716
    All day
    March 4, 2020-March 6, 2020

    Freeway Office Park, Building 8 2728 Logan Road, Eight Mile Plains

    Freeway Office Park, Building 8 2728 Logan Road, Eight Mile Plains

    AUR20716 Certificate II in Automotive Vocational Preparation is a course designed to give students a basic introduction to the automotive industry. Students undertaking this course will learn a range of tasks relating to identifying and inspecting mechanical and electrical components and systems of light vehicles.

    This is an ideal opportunity for candidates to increase their employability potential and this entry level course provides a pathway to an automotive apprenticeship.

    Accredited Units

    To successfully complete this course, you must be assessed as competent in the following units:

    AURAEA002 – Follow environmental and sustainability best practice in an automotive workplace
    AURAFA003 – Communicate effectively in an automotive workplace
    AURAFA004 – Resolve routine problems in an automotive workplace
    AURASA002 – Follow safe working practices in an automotive workplace
    AURETK001 – Identify, select and use low voltage electrical test equipment
    AURETR003 – Identify automotive electrical systems and components
    AURETR015 – Insect, test and service batteries
    AURLTA001 – Identify automotive mechanical systems and components
    AURTTK002 – Use and maintain tools and equipment in an automotive workplace
    AURTTA002 – Assist with automotive workplace activities
    AURTTA009 – Carry out mechanical pre-repair operations
    AURTTE003 – Remove and tag engine system components

    Venue

    The MTA Institute campus, Freeway Office Park, Building 8, 2728 Logan Road, Eight Mile Plains. Work placement may also be incorporated at a suitable worksite.

    Course Length

    Five weeks of face to face college-based training and assessment, including work placement where possible. Additional activities may need to be completed outside of this timeframe.

    Delivery

    MTA Institute uses a range of training and assessment methods. These include written and verbal questions/answers; and demonstration and observation of practical tasks.

    Entry requirements

    To be eligible for the Certificate 3 Guarantee program a participant must:

    • not hold or be undertaking a Certificate level III or higher qualification*
    • be an Australian or New Zealand citizen, permanent resident (including humanitarian entrants), or a temporary resident with the    necessary visa and work permits on the pathway to permanent residency.
    • permanently reside in Queensland and can provide residential confirmation of this.
    • have finished secondary school or no longer be at school
    • be aged 15 years or above.

    *Prospective students are only eligible for one subsidised training place*
    *If you completed a Certificate III qualification while in secondary school, you may still be eligible to receive a government subsidy for a Certificate III course with MTA Institute*
    Please also visit the Department of Employment, Small Business and Training website for more specific information on Certificate 3 Guarantee https://training.qld.gov.au/training/incentives/certificate3

    Click here to register

5
  • Certificate II in Automotive Vocational Preparation – AUR20716
    All day
    March 5, 2020-March 6, 2020

    Freeway Office Park, Building 8 2728 Logan Road, Eight Mile Plains

    Freeway Office Park, Building 8 2728 Logan Road, Eight Mile Plains

    AUR20716 Certificate II in Automotive Vocational Preparation is a course designed to give students a basic introduction to the automotive industry. Students undertaking this course will learn a range of tasks relating to identifying and inspecting mechanical and electrical components and systems of light vehicles.

    This is an ideal opportunity for candidates to increase their employability potential and this entry level course provides a pathway to an automotive apprenticeship.

    Accredited Units

    To successfully complete this course, you must be assessed as competent in the following units:

    AURAEA002 – Follow environmental and sustainability best practice in an automotive workplace
    AURAFA003 – Communicate effectively in an automotive workplace
    AURAFA004 – Resolve routine problems in an automotive workplace
    AURASA002 – Follow safe working practices in an automotive workplace
    AURETK001 – Identify, select and use low voltage electrical test equipment
    AURETR003 – Identify automotive electrical systems and components
    AURETR015 – Insect, test and service batteries
    AURLTA001 – Identify automotive mechanical systems and components
    AURTTK002 – Use and maintain tools and equipment in an automotive workplace
    AURTTA002 – Assist with automotive workplace activities
    AURTTA009 – Carry out mechanical pre-repair operations
    AURTTE003 – Remove and tag engine system components

    Venue

    The MTA Institute campus, Freeway Office Park, Building 8, 2728 Logan Road, Eight Mile Plains. Work placement may also be incorporated at a suitable worksite.

    Course Length

    Five weeks of face to face college-based training and assessment, including work placement where possible. Additional activities may need to be completed outside of this timeframe.

    Delivery

    MTA Institute uses a range of training and assessment methods. These include written and verbal questions/answers; and demonstration and observation of practical tasks.

    Entry requirements

    To be eligible for the Certificate 3 Guarantee program a participant must:

    • not hold or be undertaking a Certificate level III or higher qualification*
    • be an Australian or New Zealand citizen, permanent resident (including humanitarian entrants), or a temporary resident with the    necessary visa and work permits on the pathway to permanent residency.
    • permanently reside in Queensland and can provide residential confirmation of this.
    • have finished secondary school or no longer be at school
    • be aged 15 years or above.

    *Prospective students are only eligible for one subsidised training place*
    *If you completed a Certificate III qualification while in secondary school, you may still be eligible to receive a government subsidy for a Certificate III course with MTA Institute*
    Please also visit the Department of Employment, Small Business and Training website for more specific information on Certificate 3 Guarantee https://training.qld.gov.au/training/incentives/certificate3

    Click here to register

6
  • Certificate II in Automotive Vocational Preparation – AUR20716
    All day
    March 6, 2020-March 6, 2020

    Freeway Office Park, Building 8 2728 Logan Road, Eight Mile Plains

    Freeway Office Park, Building 8 2728 Logan Road, Eight Mile Plains

    AUR20716 Certificate II in Automotive Vocational Preparation is a course designed to give students a basic introduction to the automotive industry. Students undertaking this course will learn a range of tasks relating to identifying and inspecting mechanical and electrical components and systems of light vehicles.

    This is an ideal opportunity for candidates to increase their employability potential and this entry level course provides a pathway to an automotive apprenticeship.

    Accredited Units

    To successfully complete this course, you must be assessed as competent in the following units:

    AURAEA002 – Follow environmental and sustainability best practice in an automotive workplace
    AURAFA003 – Communicate effectively in an automotive workplace
    AURAFA004 – Resolve routine problems in an automotive workplace
    AURASA002 – Follow safe working practices in an automotive workplace
    AURETK001 – Identify, select and use low voltage electrical test equipment
    AURETR003 – Identify automotive electrical systems and components
    AURETR015 – Insect, test and service batteries
    AURLTA001 – Identify automotive mechanical systems and components
    AURTTK002 – Use and maintain tools and equipment in an automotive workplace
    AURTTA002 – Assist with automotive workplace activities
    AURTTA009 – Carry out mechanical pre-repair operations
    AURTTE003 – Remove and tag engine system components

    Venue

    The MTA Institute campus, Freeway Office Park, Building 8, 2728 Logan Road, Eight Mile Plains. Work placement may also be incorporated at a suitable worksite.

    Course Length

    Five weeks of face to face college-based training and assessment, including work placement where possible. Additional activities may need to be completed outside of this timeframe.

    Delivery

    MTA Institute uses a range of training and assessment methods. These include written and verbal questions/answers; and demonstration and observation of practical tasks.

    Entry requirements

    To be eligible for the Certificate 3 Guarantee program a participant must:

    • not hold or be undertaking a Certificate level III or higher qualification*
    • be an Australian or New Zealand citizen, permanent resident (including humanitarian entrants), or a temporary resident with the    necessary visa and work permits on the pathway to permanent residency.
    • permanently reside in Queensland and can provide residential confirmation of this.
    • have finished secondary school or no longer be at school
    • be aged 15 years or above.

    *Prospective students are only eligible for one subsidised training place*
    *If you completed a Certificate III qualification while in secondary school, you may still be eligible to receive a government subsidy for a Certificate III course with MTA Institute*
    Please also visit the Department of Employment, Small Business and Training website for more specific information on Certificate 3 Guarantee https://training.qld.gov.au/training/incentives/certificate3

    Click here to register

7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
April
April
April
April